Mda; Loading An Mda Program From The Program Manager - Siemens SINUMERIK 840D sl Operating Manual

Milling
Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

4.12

MDA

In "MDI" mode (Manual Data Input mode), you can enter G-code commands or standard cycles
block-by-block and immediately execute them for setting up the machine.
You have the option of loading an MDI program or a standard program with the standard cycles
directly into the MDI buffer from the program manager; you can subsequently then edit it.
You can save programs, generated or modified in the MDI working window, in the program
manager, e.g. in a directory specifically created for the purpose.
4.12.1

Loading an MDA program from the Program Manager

Procedure
Milling
Operating Manual, 05/2017, A5E40868956
Software option
You require the "Extended operator functions" option to load and save MDI
programs (for 828D).
1.
Select the "Machine" operating area.
2.
Press the <MDI> key.
The MDI editor opens.
3.
Press the "Load MDI" softkey.
A changeover is made into the Program Manager.
The "Load in MDI" window opens. It shows you a view of the program
manager.
4.
Position the cursor to the corresponding storage location, press the
"Search" softkey and enter the required search term in the search dialog
if you wish to search for a specific file.
Note: The place holders "*" (replaces any character string) and "?" (re‐
places any character) make it easier for you to perform a search.
5.
Select the program that you would like to edit or execute in the MDI win‐
dow.
6.
Press the "OK" softkey.
The window closes and the program is ready for operation.
Setting up the machine
4.12 MDA
131

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840de slSinumerik 828d

Table of Contents