5.2.2
Inserting SINUMERIK NCU to the HW Config
Overview
Insert the necessary hardware in the following order in the S7 project:
● Insert a SIMATIC station 300
● Start the hardware configuration
● Insert a SINUMERIK NCU
Operating sequence
Procedure:
1. Select via the context menu (right-click) "Insert new object" > "SIMATIC 300 station".
2. Double-click the <SIMATIC 300> symbol.
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA
5.2 Creating a SIMATIC S7 project (PROFIBUS)
PLC commissioning
53