Deleting / Unloading / Loading / Relocating All Tools - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Several magazines

If you have set up several magazines, then the "...relocate from magazine... location... to..."

window appears after pressing the "Relocate" softkey.

Select the desired magazine and location, and confirm your selection with "OK" to load the

Deleting / unloading / loading / relocating all tools

You have the option of deleting or unloading all tools in the magazine list, loading them into

the magazine list or relocating them in the magazine list. With one task, the tools are deleted

or unloaded from the list or loaded, relocated in the list.

The following requirements must be satisfied so that the "Delete all", "Unload all", "Load all"

or "Relocate all" softkey is displayed and available:

● Magazine management is set up

● There is no tool in the buffer / in the spindle

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Press the "Relocate" softkey.

The "... relocate from location ... to location ..." window is displayed. The

"Location" field is pre-assigned with the number of the first empty maga‐

zine location.

Press the "OK" softkey to relocate the tool to the recommended magazine

Enter the required magazine, enter the location number and press the

"OK" softkey.

Enter the number "9998" or the number "9999" into the "... magazine"

field in order to select the buffer as well as the required buffer location in

the "Location" field.

Press the "Spindle" softkey to load a tool into the spindle and press the

"OK" softkey.

The tool is relocated to the specified magazine location, in the spindle or

in the buffer.

Machine manufacturer

Please refer to the machine manufacturer's specifications.

Tool management

13.8 Magazine