Operator control (software)
6.1 Remote control of the control system
6.1.2
Approving remote control of the control system on the HMI
6.1.2.1
Approving remote control on the HMI
Operating sequence for 840D sl/828D controls
1. Press the "Remote diagnostics" softkey in the "Diagnosis" operating area.
Figure 6-1
"Remote diagnostics" on the HMI
2. The following settings can be made:
– Remote access rights
78
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA