Adaptation Of The Customer Text File - Siemens SINUMERIK 840D sl Commissioning Manual

Tool management
12.4 Examples
</CONFIGURATION>
12.4.1.2

Adaptation of the customer text file

The following excerpt shows the contents of the "sltmlistdialog_eng.ts" customer text file.
The file in this example is stored in the "user/sinumerik/hmi/lng" directory.
Example
"sltmlistdialog_eng.ts" file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE TS><TS>
<!-- ************************************************************** -->
<!-- Definition of OEM texts -->
<!-- ************************************************************** -->
<context>
<!-- ************************************************************** -->
<!-- Enter your text behind this comment -->
<!-- ************************************************************** -->
190
<!-- **** Type change to unsigned integer *** -->
<DisplayMode value="UnsignedIntegerMode" type="QString" />
</ToolUser_1>
<!-- **** Identifier of own parameter *** -->
<!-- **** Priority tool *** -->
<PriorTool>
<!-- ** New parameter is based on OEM tool parameter 2**-->
<Base value="ToolUser_2" type="QString" />
<!-- **** Bit 0 is evaluated *** -->
<BitMask value="1" type="int" />
<!-- **** Text identifier of the headline *** -->
<HeadLine value="TMO_HL_PRIOR_TOOL" type="QString" />
<!-- **** Text identifier of the tooltip *** -->
<ToolTip value="TMO_TT_PRIOR_TOOL" type="QString" />
<!-- **** Column width *** -->
<!-- **** Recommended widths 640x480 - 19 pixels *** -->
<!-- **** 800x600 - 21, 1024x768 - 17 *** -->
<Width value="19" type="int" />
<!-- **** Display item of the parameter *** -->
<ItemType value="CheckBox" type="QString" />
</PriorTool>
</PARAMETERCONFIGURATION>
<name>SlTmListForm</name>
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)