T,F,S Window - Siemens SINUMERIK 840D sl Operating Manual

Display
Repos offset
Footer
See also
Coordinate system (MCS/WCS) (Page 39)
1.4.3

T,F,S window

The most important data concerning the current tool, the feedrate (path feed or axis feed in
JOG) and the spindle are displayed in the T, F, and S windows.
Tool data
Display
T
Tool name
Location
D
Ø
Feed data
Display
F
Rapid traverse
0,000
Override
HMI sl Universal
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
Description
The distances traversed in manual mode are displayed.
This information is only displayed when you are in the "Repos"
submode.
Display of active zero offsets and transformations as well as the
T,F,S values.
Description
Name of current tool
Location number of current tool
Cutting edge of the current tool
Diameter of current tool
Description
Feed disable/rapid traverse reduction
Actual feed value
If several axes are traversing, the largest axis feed will be displayed
G0 is active
No feed is active
Display as a percentage
Introduction
1.4 Operator interface
23