Configure Tool Types - Siemens SINUMERIK 840D sl Commissioning Manual

12.2.5

Configure tool types

<TOOLTYPECONFIGURATION> tag
The entries used for configuring the tool types are located in the
<TOOLTYPECONFIGURATION> tag:
Entries
TOOLTYPE_XXX
Tooltype
Name
Shortname
Tooltip
Icon9 - for milling
technology
IconX - for turning
technology
Iconorder
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Meaning
XXX stands for the number of the tool type.
For the assignment of the tool type and number, please refer to Section "List
of tool types (Page 157)".
Number (XXX) of the tool type
Text identifier of the tool name. The tool name is displayed in the following
windows:
"New Tool - Favorites"
•
"New Tool - Milling Cutter 100 - 199"
•
"New Tool - Drill 200 - 299"
•
"New Tool - Special and Auxiliary Tools 700 - 900"
•
See example: For the text identifier
"End mill" appears on the user interface.
Text identifier of the tool name. Tool name is displayed in the tool list.
See example: For the text identifier
"MILLING CUTTER" appears on the user interface.
Text identifier of the tool name. This tool name is displayed in the tooltip.
See example: For the text identifier
"End mill" appears on the user interface.
Icon representing the tool type.
The icons are displayed in the following windows:
"Tool List" in the "Type" column
•
"New Tool - Favorites" in the "Tool position" column
•
"New Tool - Milling Cutter 100 - 199" in the "Tool position" column
•
"New Tool - Drill 200 - 299" in the "Tool position" column
•
"New Tool - Special Tool 700 - 900 in the "Tool position" column.
•
The icons are in ".png" format. They are stored according to image resolution
in the following directories:
/oem/sinumerik/hmi/ico/ico640, or ico800, or ico1024
/user/sinumerik/hmi/ico/ico640, or ico800, or ico1024
Icon representing the tool type (see Icon9 - for milling technology)
Special feature - tool positions are supported in turning technology.
X is for the tool position represented by the icon. Position 9 is an undefined
position represented by a cross.
Order in which the tool positions, represented by icons, are switched.
Tool management
12.2 Configuring the user interface
"TM_PAR_SHANK_END_CUTTER
"TM_PPTT_SHANK_END_CUTTER
"TM_TTTT_SHANK_END_CUTTER
", the name
", the name
", the name
159