Axis-Specific Setting Data - Siemens Sinumerik 840D sl Programming Manual

C.3

Axis-specific setting data

43120
MD number
Default setting: 1
Change valid IMMEDIATELY
Data type: DWORD
Meaning:
43240
MD number
Default setting: 0
Change valid IMMEDIATELY
Data type: DOUBLE
Meaning:
ISO Milling
Programming Manual, 06/09, 6FC5398-7BP10-1BA0
DEFAULT_SCALE_FACTOR_AXIS
Default axial scaling factor with active G51
min. input limit: -99999999
This machine data is valid in connection with external programming languages. It is effective
for $MN_MM_EXTERN_LANGUAGE = 1.
If no axial scaling factor I, J or K is programmed in the G51 block, then the
DEFAULT_SCALEFAKTOR_AXIS is active. For the scaling factor to be effective, the MD
AXES_SCALE_ENABLE must be set.
M19_SPOS
Spindle position in degrees for spindle positions with M19
min. input limit: -359.999
The setting data is also effective in the Siemens mode.
Protection level: 7/7
Valid as of software version: 5.2
Protection level: 7/7
Valid as of software version: 5.2
Data Description
C.3 Axis-specific setting data
max. input limit: 99999999
Unit: -
max. input limit: 359.999
Unit: -
177