Displaying Setting Data Lists; Handwheel Assignment - Siemens SINUMERIK 840D sl Operating Manual

Setting up the machine

4.10 Handwheel assignment

4.9

Displaying setting data lists

You can display lists with configured setting data.
Procedure
4.10 Handwheel assignment
You can traverse the axes in the machine coordinate system (Machine) or in the workpiece
coordinate system (Work) via the handwheel.
All axes are provided in the following order for handwheel assignment:
● Geometry axes
When traversing, the geometry axes taken into account the actual machine status (e.g.
rotations, transformations). All channel machine axes, which are currently assigned to the
geometry axis, are in this case simultaneously traversed.
● Channel machine axes
Channel machine axes are assigned to the particular channel. They can only be individually
traversed, i.e. the actual machine state has no influence.
The also applies to channel machine axes, that are declared as geometry axes.
102
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the "Setting data" and "Data lists" softkeys.
The "Setting Data Lists" window opens.
3. Press the "Select data list" softkey and in the "View" list, select the re‐
quired list with setting data.
Software option
You require the "Extended operator functions" option for the handwheel offset
(only for 828D).
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Operating Manual, 05/2017, A5E40869190
Grinding