Setting up the machine
3.10 Displaying setting data lists
Parameter
Description
Counter-spindle
Dimensions of the forward edge or stop edge
Jaw type 1
•
Jaw type 2
•
ZC3
Chuck dimension, counter-spindle (inc) - only for a counter-spindle that has been set-up
ZS3
Stop dimension, counter-spindle (inc) - only for a counter-spindle that has been set-up
ZE3
Jaw dimension, counter-spindle (inc) - only for a counter-spindle that has been set-up
and "Jaw type 2"
XR
Tailstock diameter - only for tailstock that has been set-up
ZR
Tailstock length - only for tailstock that has been set-up
3.10
Displaying setting data lists
You can display lists with configured setting data.
Procedure
102
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "Setting data" and "Data lists" softkeys.
The "Setting Data Lists" window opens.
3.
Press the "Select data list" softkey and in the "View" list, select the re-
quired list with setting data.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Unit
mm
mm
mm
mm
mm
Turning