All G Functions; G Functions For Mold Making - Siemens SINUMERIK 840D sl Operating Manual

6.13.2

All G functions

All G groups and their group numbers are listed in the "G Functions" window.
Within a G group, only the G function currently active in the controller is displayed.
Additional information in the footer
The following additional information is displayed in the footer:
● Actual transformations
Display
TRANSMIT
TRACYL
TRAORI
TRAANG
TRACON
● Current work offsets
● Spindle speed
● Path feedrate
● Active tool
6.13.3

G functions for mold making

In the window "G functions", important information for machining free-form surfaces can be
displayed using the "High Speed Settings" function (CYCLE832).
High-speed cutting information
In addition to the information that is provided in the "All G functions" window, the following
programmed values of the following specific information is also displayed:
● CTOL
● OTOL
● STOLF
The tolerances for G0 are only displayed if they are active.
Particularly important G groups are highlighted.
You have the option to configure which G functions are highlighted.
Milling
Operating Manual, 05/2017, A5E40868956
Meaning
Polar transformation active
Cylinder surface transformation active
Orientation transformation active
Inclined axis transformation active
Cascaded transformation active
For TRACON, two transformations (TRAANG and TRACYL or TRAANG and
TRANSMIT) are activated in succession.
Software option
You require the "Advanced Surface" software option in order to use this function.
6.13 Displaying G Functions and Auxiliary Functions
Machining the workpiece
213