Inserting The Compactflash Card - Siemens SINUMERIK 840D sl Manual

Operating and display elements
5.2 CompactFlash Card
5.2.2

Inserting the CompactFlash card

Proceed as follows
NOTICE
ESD: you must discharge yourself at the cabinet or ground terminal before touching the
CompactFlash Card.
Please proceed as follows:
1. Switch off the power supply.
2. Gently insert the new CompactFlash Card into the plug-in slot until it clicks into place.
When properly installed, the card does not extend beyond the housing.
3. Switch the power supply on again.
Figure 5-3
38
Inserting the CompactFlash card
Manual, 07/2007, 6FC5397-0AP10-2BA0
NCU