Compressor In The Iso Dialect Mode - Siemens Sinumerik 840D sl Programming Manual

N2070 Y60
N2080 X20 Y20
N2090 X00 Y00 G40 G64
M30
3.6.2

Compressor in the ISO dialect mode

The commands COMPON, COMPCURV, COMPCAD are commands of the Siemens
language and they activate a compressor function that combines several linear blocks into
one machining section. If this function is activated in the Siemens mode, even linear blocks
in the ISO mode can be compressed with this function.
The blocks can at the most consist of the following commands:
● Block number
● G01, modal or in block
● Axis assignments
● Feedrate
● Comments
If a block contains other commands (e.g., auxiliary functions, other G codes, etc.), then
compression does not take place.
Value assignments with $x for G, axes and feedrate are possible, just as the skip function.
Example: These blocks are compressed
N5
N10
N15
N20
N25
N30
N35
These blocks are not compressed
N5
N10
N20
N25
N30
N35
ISO Milling
Programming Manual, 06/09, 6FC5398-7BP10-1BA0
G290
COMPON
G291
G01 X100. Y100. F1000
X100 Y100 F$3
X$3 /1 Y100
X100 (Axis 1)
G290
COMPON
G291
G01 X100 G17
X100 M22
X100 S200
; Inner corner of N2080 90 degree
; Outer corner of N2090,
; irrelevant due to WRK deselection
; Deselect G62 and on continuous-path mode
; G17
; Auxiliary function in block
; Spindle speed in block
Motion commands
3.6 Controlling the feedrate
71