Replacing Standard Alarm Texts - Siemens SINUMERIK 840D sl Commissioning Manual

13.2.5

Replacing standard alarm texts

You can replace alarm texts of the standard SINUMERIK Operate with own alarm texts.
Creating an alarm text file
1. You can copy a sample alarm text file "oem_alarms_eng.ts" from the following directory:
2. Save or create the file in the /oem/sinumerik/hmi/lng or
3. Assign the file a user-specific name, e.g. "my_nck_alarms_eng.ts". You can freely select
Creating alarm texts
1. Open the "my_nck_alarms_eng.ts" file.
2. A separate area must be inserted for each alarm text, marked by the <message> tag.
3. The <name> tag contains the context names. Change the name and ensure that the
4. The <source> tag contains the alarm number of the standard alarm, e.g. 10000.
5. The <translation> tag contains the actual alarm text, e.g. "OEM alarm text example for
Example
<!DOCTYPE TS>
<TS>
<TS>
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
/siemens/sinumerik/hmi/template/lng
/user/sinumerik/hmi/lng directory. Create a separate file for each country language that is
supported.
the file names with the exception of the language code and the extension.
The file name always ends with the language code of the particular language and always
has the ".ts" extension. For example "my_nck_alarms_deu.ts" for German or
"my_nck_alarms_eng.ts" for English.
name is unique in the system, e.g. "myNckAlarms".
Note
The name for the <name> tag can always be freely selected. However, the name must
not clash with the "
slaeconv"
NCK alarm 10.000".
<context>
<name>myNckAlarms</name>
<message>
<source>10000/NCK</source>
<translation> OEM alarm text example for NCK alarm 10.000</translation>
</message>
</context>
13.2 Configuring alarm and message texts via alarm text files
name used by Siemens.
Configuring alarms
213