Factory Setting Of The Windows Firewall On The Siemens Pc System - Siemens SINUMERIK 840DE sl Commissioning Manual

Basesoftware and operating software

Hide thumbs Also See for SINUMERIK 840DE sl:

Table of Contents

Configuration of the system

4.17 Adapting the firewall settings

Factory setting of the Windows Firewall on the Siemens PC system

The Windows Firewall settings on your Siemens PC system are appropriately configured by

the PCU-Basesoftware for the use of SINUMERIK software and systems. For security reasons,

the Windows Firewall is activated in the company network and expanded by additional rules.

The Windows Firewall is deactivated in the system network. The descriptions in this chapter

therefore largely relate to the adaptation of the firewall settings for the company network.

Network name for PCU 50.5

Network profile

Status Windows Firewall

See: General information on the settings

recommended for Windows (Page 70)

File and printer release

See: Activation/deactivation of the file

and printer release (Page 76)

SNMP communication

See: Enabling SNMP communication

Remote access (via port 5900)

See: Activate the remote access to the

PC system (Page 73)

Outgoing ICMP Ping requests from the

See: Activation of the ping execution

(ICMP) (Page 88)

Incoming ICMP Ping requests on the PC

See: Activation of the ping execution

(ICMP) (Page 88)

Automatic network release of USB data storage media results in activation of the file and printer

The automatic network release of USB data storage media is activated in the default setting

of the NCU-Basesoftware. The file and printer release is then activated by Windows when a

USB data storage medium is connected.

See: Configuring network access on the USB data storage medium (Page 34)

Sinumerik 840d sl