Entering Asian Characters - Siemens SINUMERIK 840D sl Operating Manual

Introduction
2.4 Operator interface
2.4.12.2

Entering Asian characters

Precondition
The control has been switched over to Chinese.
Procedure
Editing characters using the Pinyin method
+
Editing characters using the Zhuyin method (only traditional Chinese)
+
48
1. Open the screen form and position the cursor on the input field.
Press the <Alt +S> keys.
The editor is displayed.
2. Enter the desired phonetic notation using Latin letters. Use the upper
input field for traditional Chinese.
3. Press the <Cursor down> key to reach the dictionary.
4. Keeping the <Cursor down> key pressed, displays all the entered pho‐
netic notations and the associated selection characters.
5. Press the <BACKSPACE> softkey to delete entered phonetic notations.
6. Press the number key to insert the associated character.
When a character is selected, the editor records the frequency with which
it is selected for a specific phonetic notation and offers this character at
the top of the list when the editor is next opened.
1. Open the screen form and position the cursor on the input field.
Press the <Alt +S> keys.
The editor is displayed.
2. Enter the desired phonetic notation using the numerical block.
Each number is assigned a certain number of letters that can be selected
by pressing the numeric key one or several times.
3. Press the <Cursor down> key to reach the dictionary.
4. Keeping the <Cursor down> key pressed, displays all the entered pho‐
netic notations and the associated selection characters.
Operating Manual, 05/2017, A5E40868517
Universal