Starting A Service Session - Siemens SINUMERIK 840Di sl Function Manual

2 Maschine information
2.5 Remote access
Function
Remarks
(Annotate)
Video transmission from the
PC of the service engineer
(video session)
Remote printing
(Remote print)

2.5.3 Starting a service session

Overview
To open a teleservice session, select main menu item "Machine information" and
then menu item "Run teleservice". Go to the "Remote access" section and click on
the "Run teleservice" link.
The session ID shown is transferred to the machine operator:
Fig. 2-34: Transfer session ID
2-66
Property
The "Annotate" function provides a kind of marker
pen function. You can use this marker pen to give
the machine operator instructions within the
following functions:
•
Remote display - application view and
desktop view
•
Remote control - application control and
desktop control
You can use the "Show video" function to transfer
a video image from your workstation to the
machine operator. This can be used to show a
drawing, for example.
A special printer can be activated on the control.
If data is output to this printer, it is redirected to
your service PC during an online link. This
enables a printout of important information to be
forwarded to you. The printout is then output on
the printer of the service PC.
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
12/2008