You can list the address data of any number of OEM regional offices in the "oemsubs.xml"
file. If you wish to enter additional regional offices, copy the area <Manufacturer-Subsidiary>
to </Manufacturer-Subsidiary>.
You can list the address data of any number of users in the "user.xml" file. If you wish to
enter additional users, copy the area <User> to </User>.
Example of file "ma_types.xml"
You can acquire the available machine types in file "ma_types.xml".
<?xml version="1.0" encoding="utf-8" ?>
<Machinetypes>
</Machinetypes>
18.6.3
Reading in a selection file
You can directly read-in your selection files into the controller. Depending on the
configuration, files can be selected and imported from a local drive, network drive or USB.
The data are then automatically copied into the following folder:
/oem/sinumerik/hmi/template/identity.
Selection files
This procedure applies for the following selection files:
File
ma_types.xml
dealer.xml
oem.xml
oemsubs.xml
user.xml
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
<Type>LC 80</Type>
<Type>LC 82</Type>
<Type>LC 120</Type>
<Type>LC 122</Type>
<Type>LC 150</Type
Information
Machine types
Dealer's data
Manufacturer's data
Manufacturer's data of a regional office
End customer data
Service and diagnostics
18.6 Machine identity
331