System Features - Siemens MCP 398C Manual

Description

2.2 System features

2.2 System features
Configuration
Operator controls:
● Mechanical short-stroke keys
● Operating mode and function keys:
– 50 keys with assigned LEDs, of which 17 freely assignable customer keys in the
– Direction keys for milling machines with rapid traverse override
● Spindle control with spindle override (rotary switch with 16 positions)
● Feed control with feed rate / rapid traverse override (rotary switch with 23 positions)
● Keyswitch (four positions and three different keys)
● Emergency stop button, two contact blocks (one NO contact + one NC contact each)
Interfaces:
● Two Ethernet interfaces (transmission rate: 10/100 Mbit/s; for IE and PN)
● Nine customer-specific inputs (e.g. for illuminated pushbuttons)
● Six customer-specific outputs
● Connection for two handwheels (Sub-D)
Velocity input and contour handwheel are only possible when connecting via the MCP PN
interface 6FC5303-0AF03-0AA0.
● Connection for one additional electronic override rotary switch
Expansion modules:
EM 66:
● When installed next to the MCP 398C, this results in a total width of 464 mm. The EM 66
is therefore suitable for use with the TOP 1900.
● Four 16 mm or three 22 mm slots (depending on the size of the switching elements).
● Space for the integration, for example, of pushbuttons, USB interface or other operator
controls.
EM 131:
● When installed next to the MCP 398C, this results in a total width of 529 mm. The EM 131
is therefore suitable for use with the TOP 2200.
● Six 16 mm or 22 mm slots (depending on the size of the switching elements).
● Space for the integration, for example, of pushbuttons, a USB interface, an Ethernet
interface, a handwheel, an additional override switch or other operator controls.
12
standard assignment
(The key covers for the direction keys for turning machines are supplied, see Section
Front side (Page 25))
Machine control panel: MCP 398C
Manual, 12/2017, A5E43199783B AA