Commissioning Tcu; Using The Tcu's Main Menu - Siemens SINUMERIK 840D sl Manual

General information and networking
1.4 Networking
IP address
192.168.214.1
192.168.214.2 – 9
192.168.214.10 – 239
192.168.214.240
192.168.214.241
192.168.214.242 – 249
192.168.214.250 – 254
● Service connection with subnet mask 255.255.255.224:
IP address
192.168.215.1
192.168.215.2 – 23
192.168.215.24 – 30
1.4.2

Commissioning TCU

1.4.2.1

Using the TCU's main menu

Key assignment
Functions of the keys and softkeys in the "Operator panel service system":
Softkey
Page
Page
Char
Char
42
Network station
NCU on X120
For additional NCUs with a fixed IP address on
the system network
For additional TCUs, subsequently for additional
PCUs, NCUs, MCPs, MPPs
Reserved for EKS (Electronic Key System)
Fixed IP address of the PCU on Eth 2
For additional PCUs with a fixed IP address
For PGs with a fixed IP address (service con‐
nection)
Network station
NCU on X127
for service purposes with PG, PC
fixed IP address, for example for a modem
Key on OP
HSK1
HSK2
HSK3
HSK4
HSK5
HSK6
VSK7
Cancel
VSK8
Ok
External key‐ Description
board
<F1> Moves the cursor down a row
<F2> Moves the cursor up a row
<F3> Moves the cursor down a page
<F4> Moves the cursor up a page
<F5> Inserts text or digits
<F6> Inserts text or digits
← Cancel / Return
→ OK / Confirm
Remark
Default
Unassigned
DHCP clients
Default
Default
Unassigned
Unassigned
Remark
Default
DHCP clients
Unassigned
Operator panel front: OP 012
Manual, 09/2016, A5E36371591B