Example: X Axis And Z Axis, Main Spindle, Tool Spindle And Counter–Spindle, Y Axis - Siemens SINUMERIK 840D sl Commissioning Manual

9 Additional Functions
9.3 Cylinder surface transformation, end face machining
9.3.5 Example: X axis and Z axis, main spindle, tool spindle, and
counter–spindle, Y axis
9-138
For example, for a turning machine with X, Z, and Y axes, main spindle (C1),
tool spindle (WZ), and counter–spindle (C2) you must configure the following
machine data:
20080 $MC_AXCONF_CHANAX_NAME_TAB[0]="XC"
Channel axis XC
20080 $MC_AXCONF_CHANAX_NAME_TAB[1]="ZC"
Channel axis ZC
20080 $MC_AXCONF_CHANAX_NAME_TAB[2]="C1"
Channel axis C1
20080 $MC_AXCONF_CHANAX_NAME_TAB[3]="WZ"
Channel axis WZ
20080 $MC_AXCONF_CHANAX_NAME_TAB[4]="C2"
Channel axis C2
20080 $MC_AXCONF_CHANAX_NAME_TAB[5]="YC"
Channel axis YC
General settings for transformations:
10602 $MN_FRAME_GEOAX_CHANGE_MODE=1
Take coordinate transformations in total frame into account when switching be-
tween geometry axes
24040 $MC_FRAME_ADAPT_MODE=H7
Adaptation of active frames
28082 $MC_MM_SYSTEM_FRAME_MASK, Bit 6 = 1
Configuring of channel–specific system frames included in channel calculation
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
© Siemens AG 2006 All Rights Reserved
11/2006