Open Source Software / Licenses - Siemens SINUMERIK 840D sl Operating Manual

Integrate access mymachine /p2p (pc) cnc
Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

7.6

Open source software / licenses

This "SINUMERIK Integrate Access MyMachine /P2P (PC)" software uses open source
software.
● "This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit (OpenSSL (http://www.openssl.org))."
● "This product includes cryptographic software written by Eric Young (Cryptsoft Eric Young
(mailto:eay@cryptsoft.com))."
● "This product includes software written by Tim Hudson (Cryptsoft Tim Hudson
(mailto:tjh@cryptsoft.com))."
● "This product includes software developed by Bodo Möller."
For further information, refer to the "License.txt" file in the Access MyMachine /P2P(PC)
installation folder
License conditions for the product
This "SINUMERIK Integrate Access MyMachine /P2P (PC)" software is subject to the Siemens
license conditions and third-party license conditions.
For further information, refer to the "LiesMich_OSS.html" or the "ReadMe_OSS.html" file on
the installation data storage medium.
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
7.6 Open source software / licenses
Reference
161

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 828d slSinumerik 808d sl

Table of Contents