Displaying Setting Data Lists; Handwheel Assignment - Siemens SINUMERIK 840D sl Operating Manual

Setting up the machine

4.11 Handwheel assignment

Parameter
ZC3
ZS3
ZE3
XR
ZR
4.10

Displaying setting data lists

You can display lists with configured setting data.
Procedure
4.11 Handwheel assignment
You can traverse the axes in the machine coordinate system (Machine) or in the workpiece
coordinate system (Work) via the handwheel.
100
Description
Dimensions of the forward edge or stop edge
● Jaw type 1
● Jaw type 2
Chuck dimension, counter-spindle (inc) - only for a counter-spindle that has been
set-up
Stop dimension, counter-spindle (inc) - only for a counter-spindle that has been set-
up
Jaw dimension, counter-spindle (inc) - only for a counter-spindle that has been set-
up and "Jaw type 2"
Tailstock diameter - only for tailstock that has been set-up
Tailstock length - only for tailstock that has been set-up
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the "Setting data" and "Data lists" softkeys.
The "Setting Data Lists" window opens.
3. Press the "Select data list" softkey and in the "View" list, select the re‐
quired list with setting data.
Software option
You require the "Extended operator functions" option for the handwheel offset
(only for 828D).
Unit
mm
mm
mm
mm
mm
Operating Manual, 05/2017, A5E40868721
Turning