Additional Software; Sinutrain - Siemens SINUMERIK 828D Manual

1.7
22
Basic information
1.7

Additional software

1.7.1 SinuTrain

SinuTrain provides for SINUMERIK controls an intuitive PC-based solution that consists of
control-identical software. SinuTrain allows practical offline programming at a PC; these NC
programs can be transferred directly to the CNC. Using SINUMERIK Operate and the original
SINUMERIK CNC kernel, all operating and programming operations can be used and CNC
programs executed, without any restrictions.
Advantages at a glance
Almost 100-percent offline verification/evaluation of the NC programs thanks to the original
CNC kernel.
Use as optimum programming station by adaptation to the real machine (e. g. by the machine
manufacturer).
Perfectly tailored packages for training and production planning.
Operating, programming and simulating exactly as for the real SINUMERIK.
© Siemens AG All rights reserved SINUMERIK, Manual, Mold-Making with 3- to 5-Axis Simultaneous Milling