Selecting Axes - Siemens SINUMERIK 840D sl Commissioning Manual

Procedure
18.2.1

Selecting axes

Procedure
To display certain enables and statuses of machine axes, you can arrange a selection of all
the axes that are available in any order you wish.
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
1. Select the "Diagnostics" operating area.
2. Press the menu forward key.
New horizontal softkeys are displayed.
3. Press the "Axis diagn." softkey.
The "Service Overview" window opens.
1. Select the "Diagnostics" operating area.
2. Press the menu forward key.
New horizontal softkeys are displayed.
3. Press the "Axis diagn." softkey.
The "Service Overview" window opens.
4. Press the "Change overview" softkey.
A new softkey bar is displayed.
5. If you want to display the information relating to the axes that are active,
press the "Active axes" softkey. This will display the axes to which a real
drive is assigned.
- OR -
Press the "All axes" softkey if you want the information for all axes to be
displayed. This will display all the axes that are defined in at least one
channel.
- OR -
Press the "Change selection" softkey if you want to make a new axis
selection to be displayed.
The "Change Selection" window opens and the previous axis list is
displayed.
Service and diagnostics
18.2 Displaying the Service overview
311