Analog Spindles; Use A Workpiece Template - Siemens SINUMERIK 840D sl Commissioning Manual

Functions

3.12 Analog spindles

3.12 Analog spindles
The spindle load from 0 to 100% can be displayed in the spindle window for up to two analog
spindles.
Set the following bytes in DB 19:
● Analog spindle: DB19.DBB 6
● Analog spindle: DB19.DBB 7
3.13

Use a workpiece template

You can use workpiece templates that will be used as templates for similar programs. Create
a workpiece called _TEMPL_, copy it, and then give it a new name.
Example
Suppose you want to create a workpiece template with the content "Daten.ini" and
"TEST.MPF": Workpiece: _TEMPL_
_TEMPL_.MPF
DATEN.INI
TEST.MPF
Procedure
1. Press the softkey "New".
2. Assign a new name, e.g. "AXIS"
3. The new workpiece "ACHSE" is created with the following files:
ACHSE.MPF
DATEN.INI
TEST.MPF
38
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0