Program Jumps And Branches; Return Jump To The Start Of The Program (Gotos) - Siemens SINUMERIK 840D sl Programming Manual

Flexible NC programming

1.10 Program jumps and branches

%E
%G
%S
%X
%P
Note
The table indicates that the NC data types AXIS and FRAME cannot be directly used in the
SPRINT function. However it is possible:
 To convert the AXIS data type into a string using the AXSTRING function – which can
 To read the individual values of the FRAME data type per frame component access. As a
1.10 Program jumps and branches
1.10.1

Return jump to the start of the program (GOTOS)

Function
The
order to repeat the program.
Machine data can be used to set that for every return jump to the beginning of the program:
● The program runtime is set to "0".
● Workpiece counting is incremented by the value "1".
Syntax
GOTOS
96
-
-
- +
+ +
-
then be processed with SPRINT.
consequence, a REAL data type is obtained, which can be processed with SPRINT.
command can be used to jump back to the beginning of a main or sub program in
GOTOS
NC data types
- +
- +
-
+
- +
+ -
+ -
- +
- -
+ -
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
- -
- -
- -
- -
- -
Job Planning