Displaying And Editing Base Zero Offset - Siemens SINUMERIK 840D sl Operating Manual

Setting up the machine
2.5 Work offsets
Work offsets
Cycle reference
Total WO
Procedure
2.5.3

Displaying and editing base zero offset

The defined channel-specific and global base offsets, divided into coarse and fine offsets,
are displayed for all set-up axes in the "Work offset - Base" window.
Procedure
62
Displays the additional work offsets programmed with
$P_CYCFRAME.
Displays the active work offset, resulting from the total of all work
offsets.
1. Select the "Parameter" operating area.
2 Press the "Work offset" and "Overview" softkeys.
The "Work Offsets - Overview" window opens.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the "Work offset" softkey.
3. Press the "Base" softkey.
The "Work offset - Base" window is opened.
4. You can edit the values directly in the table.
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
Universal