Current Control Software - Siemens SINUMERIK 840Di sl Function Manual

2 Maschine information
2.1 Machine overview

2.1.1 Current control software

Description of functions
In the Machine information area under Current Control Software, you can view all
versions of the software packages currently installed on the control
Fig. 2-1: Control software
Function
Current control
software
2.1.2 Machine events – List view
Description of functions
Under Machine events in the Machine information area, you can view events for
the selected machine in list format. Examples:
•
Events from Control Monitor Services
-
-
-
Events that have been configured by control monitors with the identification
"Without entry in the machine events" do not generate an entry, and their
details cannot be viewed either.
•
Events from condition monitor services
-
-
2-20
Description
Displays the installed software version:
The display depends on the device class.
Alarm or PLC events
Fault processing request
Cyclic events (time trigger)
Exceeded interval limits of variable monitors
Limit value violation for measurement series / test series
ePS Network Services, Function Manual (FH) - Release 12/2008
© Siemens AG 2008 All Rights Reserved
12/2008