Swivel Plane (Cycle800) - Siemens SINUMERIK 828D Manual

Complete machining

14.2 Swivel plane (CYCLE800)

14.2 Swivel plane (CYCLE800)
Multi-face machining saves setup times and increases the precision of finished adjoining
sides because the part must not be reclamped. The swivel cycle is used for easy input of
parameters for automatic machining and measuring on the various planes.
A prerequisite is that the machine is equipped with additional rotary axes (swivel head
and/or swivel table).
The swivel cycle is available in the ShopMill machining step - as well as in
programGUIDE DIN/ISO programming.
The planes can be swiveled not only by direct swiveling with rotation of coordinates and
swiveling about the axes, but also by specifying a projection or spatial angle for swiveling.
Flexible combination of shift - swivel - shift.
Turning or moving are not machine-specific, as they are based on the workpiece
coordinate system X, Y and Z.
Fixed relief positions available
Benefit
Programming with standard cycles and easy transformation on the inclined plane through
the swivel cycle
92
SINUMERIK 828D
BASIC
Basic configuration
SINUMERIK 840D sl
BASIC
Basic configuration
Control system overview for machine tools' sales people, 2017, A5E41992599B AA
SINUMERIK 828D
Basic configuration
SINUMERIK 840D sl
Basic configuration
SINUMERIK 828D
ADVANCED
Basic configuration
SINUMERIK Operate - Milling