Software Options For Safety Integrated (Spl) - Siemens SINUMERIK 840D sl Configuration Manual

9.6.2

Software options for Safety Integrated (SPL)

To configure SINUMERIK Safety Integrated (SPL), SIMATIC STEP 7 Safety Advanced (TIA
Portal) without license suffices. (SIMATIC STEP 7 Safety Advanced without license
corresponds to the F-configuration tool from STEP 7 V5.x)
To use the configuring in SINUMERIK Operate, you require the appropriate software options:
Table 9- 2
Software option
SI Basic
SI Comfort
SI High Feature
SI Axis/Spindle
SI Axis/Spindle
package
SI-Connect
Depending on the functionality used, you must license the appropriate software options and
set in the machine data:
● MD19120 $MN_NUM_SAFE_AXES: Number of SI axes/spindles
● MD19122 $MN_NUM_SPL_IO: Number of SPL I/Os
1 = 4 SPL I/O or SI-Basic software option
2 = 64 SPL I/O or SI-Comfort software option
3 = 192 SPL I/O or SI-High Feature software option
● MD19510 $MN_SAFE_FUNCTION_MASK: Number of FSEND and FRECV connections
SI-Connect software option: Bit 0 = 1
See also:
● SINUMERIK 840D sl Basic Software and Operating Software Commissioning Manual,
Section SINUMERIK Operate (IM9).
● Function Manual, SINUMERIK Safety Integrated
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325
Software options for use of Safety Integrated (SPL)
Purpose
Activate SPL
Contains a license for one axis/spindle, up to four SPL I/O
Activate SPL
Contains a license for one axis/spindle, up to 64 SPL I/O
Activate SPL
Contains a license for one axis/spindle, up to 192 SPL I/O
Additional license for one axis/spindle, multiple licensing in order to be able to
use further axes/spindles.
Additional license for 15 axes/spindles, multiple licensing in order to be able to
use further axes/spindles.
Make more than three FSEND and three FRECV connections available.
Safety configuration
9.6 Licensing
175