Example 3: Nc Program For Milling - Siemens SINUMERIK 840D sl Programming Manual

Creating an NC program
3.4 Program examples
3.4.3

Example 3: NC program for milling

Program example 3 is intended for the machining of a workpiece on a vertical milling
machine. It contains surface and side milling as well as drilling.
Note
In order that the program can run on the machine, the machine data must have been set
appropriately ( → machine manufacturer!).
Dimension drawing of the workpiece
Figure 3-2
Figure 3-3
52
Side view
Top view
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Fundamentals