Integrating Runtime In Sinumerik Operate (Pc Systems) - Siemens sinumerik 840d sl Configuration Manual

11.3

Integrating Runtime in SINUMERIK Operate (PC systems)

You use the "Integration SINUMERIK Operate" tool to integrate the "WinCC RT Advanced"
Runtime in SINUMERIK Operate. You can make various settings in the corresponding
dialog, for example, you can specify the softkey via which the Runtime of SINUMERIK
Operate is available.
The tool is installed on the PCU 50.5 by the setup program for SINUMERIK Integrate Create
MyHMI /WinCC. "WinCC RT Advanced" Runtime supplied on the product DVD must be
installed beforehand for this purpose.
See: Installing software on the PC system (PCU 50.5) (Page 26)
Requirement
● The operating system of the PC system is Windows 7.
● The following software is installed on the PC system:
– "WinCC RT Advanced" Runtime supplied on the product DVD is installed.
– SINUMERIK Integrate Create MyHMI /WinCC is installed.
– SINUMERIK Operate is installed.
● The configuration file "pdata.fwc" can be accessed from the PC system and the path to
this file does not contain spaces.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
See Installing software on the PC system (PCU 50.5) (Page 26).
See Installing software on the PC system (PCU 50.5) (Page 26).
Loading and integrating a configuration (PC systems)
11.3 Integrating Runtime in SINUMERIK Operate (PC systems)
145