Machining the workpiece
6.11 Working with DXF files
6.11.2.2
Cleaning a DXF file
All contained layers are shown when a DXF file is opened.
Layers that do not contain any contour- or position-relevant data can be shown or hidden.
Requirement
The DXF file is open in the Program Manager or in the editor.
Procedure
6.11.2.3
Enlarging or reducing the CAD drawing
Requirement
The DXF file is opened in the Program Manager.
154
3.
Press the "Open" softkey.
The selected CAD drawing will be displayed with all its layers, i.e. with all
graphic levels.
4.
Press the "Close" softkey to close the CAD drawing and to return to the
Program Manager.
1.
Press the "Clean" and "Layer selection" softkeys if you want to hide spe‐
cific layers.
The "Layer Selection" window opens.
2.
Deactivate the required layers and press the "OK" softkey.
- OR -
Press the "Clean automat." softkey to hide all non-relevant layers.
3.
Press the "Clean automat." softkey to redisplay the layers.
Operating Manual, 05/2017, A5E40868721
Turning