16.2.1
Selecting axes
To display certain enables and statuses of machine axes, you can arrange a selection of all
the axes that are available in any order you wish.
Proceed as follows
HMI sl (IM9)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
1.
Select the "Diagnostics" operating area.
2.
Press the menu forward key.
New horizontal softkeys are displayed.
3.
Press the "Axis diagn." softkey.
The "Service Overview" window opens.
1.
Select the "Diagnosis" operating area.
2.
Press the menu forward key.
New horizontal softkeys are displayed.
3.
Press the "Axis diagn." softkey.
The "Service overview" window opens.
4.
Press the "Change overview" softkey.
A new softkey bar appears.
5.
If you want to display the information relating to the axes that are
active, press the "Active axes" softkey. This will display the axes to
which a real drive is assigned.
- OR -
Service and diagnostics
16.2 Displaying the Service overview
159