Measuring Workpieces At Lathes: 2-Point Measurement - Siemens SINUMERIK 840D sl Programming Manual

1.13.4

Measuring workpieces at lathes: 2-point measurement

CYCLE994 is used to determine the actual value of the workpiece in the selected measuring
axis with reference to the workpiece zero with 2-point measurement. This is done
automatically by approaching two opposite measuring points on the diameter.
2-point measurement on diameter, outside or inside
Result:
● Actual dimension: Diameter
● Deviation: Tool offset
Measuring cycles
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
1.13 Overview of measuring cycle functions for turning technology
General
59