Trigger On End Of Data Acquisition (Amp Function) - Siemens SINUMERIK Series Function Manual

03/2012

3.4.16 Trigger on end of data acquisition (AMP function)

Is only possible in conjunction with Access MyPerformance (AMP).
The "Trigger on end of data acquisition" monitors the following states of the ePS
Client frontend PC:

Activated and supplies data

Deactivated and does not supply data
The trigger is initiated when the client no longer acquires data.
Fig. 3-46: Trigger on end of data acquisition
Function
Machine status
identification
OK
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
Activate/deactivate checkbox
Return to the control monitor
3 Setting up functions
3.4 Fault services
Type
DISPLAY
ACTION
3-159