Supplementary Conditions - Siemens SINUMERIK 840D sl Commissioning Manual

Supplementary Conditions

© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
When using ShopTurn please observe the following general conditions:
S
ShopTurn only runs in channel 1, mode group 1.
S
ShopTurn has been designed for use with universal turning machines with
four axes (X, Z, Y, and auxiliary axis for counterspindle) and 3 spindles
(main, tool, and counterspindle).
S
ShopTurn only runs with tool management.
S
If you want to use rotating tools, you need the software option "cylinder
surface transformation" (Tracyl) and "end face machining" (Transmit).
Order No. 6FC5 800–0AM27–0YB0
S
If you want to use a counterspindle on your machine, you need the software
options "travel to fixed stop" (Order No. 6FC5 800–0AM01–0YB0) and
"synchronous spindle" (Order No. 6FC5 800–0AM14–0YB0).
S
With ShopTurn Open you must not change the position of the following soft-
keys in the basic menu bar; i.e. in the REGIE.INI file these functions must
always have been assigned a specific task.
Task 0 (horizontal softkey 1): Operating area – Machine
Task 1 (horizontal softkey 2): Operating area – Program manager
Task 2 (horizontal softkey 3): Operating area – Program
Task 4 (horizontal softkey 5): Operating area – Tools/Zero offsets
S
With ShopTurn it is possible via TCU to use several operator panels.
S
The HMI and Windows screen savers must not be used together.
References: /IAM/, Commissioning Manual CNC Part 2 (HMI),
/IM2/ Commissioning HMI Embedded (sl)
/IM4/ Commissioning HMI Advanced
SINUMERIK, 840D sl/840D/840Di/810D,
2
J
2-13