Station-Related Network Diagnostics - Siemens SINUMERIK 840D sl Commissioning Manual

Service and diagnostics

18.11 Station-related network diagnostics

18.11 Station-related network diagnostics
Using the station-related network diagnostics, you have the possibility of identifying faulty or
incorrectly parameterized components or those components that have not been connected.
You obtain an overview of all of the components belonging to the system network:
● NCU
● PCU
● TCU
● MCP
● EKS
If components are either faulty or absent (or unavailable), they will be marked as such in this
overview.
Error analysis
You have the option of initiating a fault analysis for the components involved. You obtain the
result of a such a diagnostics in the form of a fault message. The possible fault states and
causes are described in this fault message together with how to resolve the fault.
18.11.1 Displaying network adapters
The actual network adapters (system network X120, company network X130 or system
network ETH2 and company network ETH1) and their availability are displayed in a tree-like
structure in the "TCP/IP diagnostics" window.
Displaying the components
The following components are displayed in the window:
● The control is displayed at the topmost level.
● System network (X120 / ETH2) with configured operator stations with IP address
– Operator panels with IP address
– Machine control panels
– EKS
● Company network (X130 / ETH1) with
– Operator panels with IP address
– Machine control panels
– EKS
352
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)