Adding Hardware Components - Siemens SINUMERIK 840D sl Commissioning Manual

Basesoftware and operating software
Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

Service and diagnostics
18.6 Machine identity
18.6.5

Adding hardware components

Most of the hardware components supplied by Siemens are already electronically acquired.
You can add further hardware components.
You can view and supplement the hardware components in the version screen at the user
interface.
All of the hardware components are listed in the version display and in the configuration
data.
Precondition
You require access level 2 (service) to add more hardware components.
Entering additional components
If new hardware components are added, they must be assigned to the appropriate
categories. The "Select component" drop-down list box offers the following categories in the
"Add HW Comp." window:
Category
NCU/PLC
Operator Panel
PLC-peripheral devices
Drive/Motor
Cable
Accessories/Miscellaneous
You record the following data in the "Enter Additional Components (Configuration Data)"
window.
Entries
Name
Version
Order No.[MLFB]
Serial number
Number
334
Meaning
Hardware designation
Version of the program
Order number
Serial number
Number of components
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840de sl

Table of Contents