Creating Collision Pairs - Siemens SINUMERIK 840D sl Commissioning Manual

14.8.2.4

Creating collision pairs

Tool/table collision pair
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
4. Enter the following values:
Name: T
Color: red
Details level: 0
PLC bit: -1
Activation: Activated
TO unit: 1
Magazine: 9998
Location: 1
5. Press the "OK" softkey to save the values.
1. Mark the "Collision groups" folder and press the "New element" softkey.
A selection window for the collision element opens.
2. Select the "Collision pair" collision element and press the "OK" softkey.
The appropriate input window for the element values opens in the lower
part of the tree view.
3. Enter the required values:
1st range: T
2nd range: Table
4. Press the "OK" softkey to save the values.
- OR -
Press the "Cancel" softkey to close the input window.
Collision avoidance
14.8 Collision avoidance example
275