Reserved Functions
PROG_EVENT
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
The following functions are utilized by ShopMill and must not be assigned for
other purposes.
The system cycle PROG_EVENT.SPF is used by the standard cycles and by
ShopMill.
If you also want to use the cycle PROG_EVENT.SPF for user functions, you
must implement those user functions in the cycles CYCPE_US.SPF or
CYCPE1US.SPF. Save these cycles in the directory for user cycles or
manufacturer cycles.
3
J
3-15