Setting up the machine
3.5 Zero offsets
3.5.6
Deleting a zero offset
You have the option of deleting work offsets. This resets the entered values.
Procedure
...
80
1.
Select the "Parameter" operating area.
2.
Press the "Work offset" softkey.
3.
Press the "Overview", "Basis" or "G54...G599" softkey.
4.
Press the "Details" softkey.
5.
Position the cursor on the work offset you would like to delete.
6.
Press the "Clear offset" softkey.
A confirmation prompt is displayed as to whether you really want to
delete the work offset.
7.
Press the "OK" softkey to confirm that you wish to delete the work off-
set.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal