Altera cyclone V Technical Reference page 230

5-36
Scan Manager Group Register Descriptions
module Fields
Bit
3
emac_1
2
emac_0
Scan Manager Group Register Descriptions
Registers related to the Scan Manager that aren't located inside the Scan Manager itself.
Offset:
0x30
ctrl
on page 5-36
Controls behaviors of Scan Manager not controlled by registers in the Scan Manager itself.
ctrl
Controls behaviors of Scan Manager not controlled by registers in the Scan Manager itself.
Module Instance
sysmgr
Offset:
0x30
Access:
RW
Important: To prevent indeterminate system behavior, reserved areas of memory must not be accessed by
Altera Corporation
Name
Used to disable signals from the FPGA fabric to the
EMAC modules that could potentially interfere with
their normal operation. The array index corresponds
to the EMAC module instance.
Value
0x0
0x1
Used to disable signals from the FPGA fabric to the
EMAC modules that could potentially interfere with
their normal operation. The array index corresponds
to the EMAC module instance.
Value
0x0
0x1
0xFFD08000
software or hardware. Any area of the memory map that is not explicitly defined as a register
space or accessible memory is considered reserved.
Description
Description
Signals from FPGA fabric cannot affect
operation of the EMAC module.
Signals from FPGA fabric can potentially
affect operation of the EMAC module.
Description
Signals from FPGA fabric cannot affect
operation of the EMAC module.
Signals from FPGA fabric can potentially
affect operation of the EMAC module.
Base Address
Access
Register Address
0xFFD08030
cv_5v4
2016.10.28
Reset
RW 0x0
RW 0x0
System Manager
Send Feedback