Altera cyclone V Technical Reference page 833

13-12
MAP10 Operations
MAP10 Operations
Table 13-9: MAP10 Operations
Command
0x01
0x10
0x11
0x21
0x31
0x41
0x42
0x43
0x60
0x61
0x62
0x1000
0x11<PP>
0x20<PP>
0x21<PP>
MAP10 Usage Limitations
Use the MAP10 commands as follows:
Altera Corporation
Sets block address for erase and initiates operation
Sets unlock start address
Sets unlock end address and initiates unlock
Initiates a lock of all blocks
Initiates a lock-tight of all blocks
Sets up for spare area access
Sets up for default area access
Sets up for main+spare area access
Loads page to the buffer for a RMW operation
Sets the destination address for the page buffer in RMW operation
Writes the page buffer for a RMW operation
Sets copy source address
Sets copy destination address and initiates a copy of <PP> pages
Sets up a pipeline read-ahead of <PP> pages
Sets up a pipeline write of <PP> pages
Function
NAND Flash Controller
cv_5v4
2016.10.28
Send Feedback