Features Of The Hps - Altera cyclone V Technical Reference

cv_5v4
2016.10.28

Features of the HPS

The main modules of the HPS are:
• MPU subsystem featuring a single- or dual-core ARM Cortex-A9 MPCore processor
• General-purpose direct memory access (DMA) controller
• Two ethernet media access controllers (EMACs)
• Two USB 2.0 on-the-go (OTG) controllers
• NAND flash controller
• Quad SPI flash controller
• Secure digital/multimedia card (SD/MMC) controller
• Two serial peripheral interface (SPI) master controllers
• Two SPI slave controllers
• Four inter-integrated circuit (I
• 64 KB on-chip RAM
• 64 KB on-chip boot ROM
• Two UARTs
• Four timers
• Two watchdog timers
• Three general-purpose I/O (GPIO) interfaces
• Two controller area network (CAN) controllers
• ARM Coresight
• Debug access port (DAP)
• Trace port interface unit (TPIU)
• System trace macrocell (STM)
• Program trace macrocell (PTM)
• Embedded trace router (ETR)
• Embedded cross trigger (ECT)
• System manager
• Clock manager
• Reset manager
• Scan manager
• FPGA manager
• SDRAM controller subsystem
(1) Two of the four I
Introduction to the Hard Processor System
Send Feedback
2
C) controllers
debug components:
™
2
Cs, provide support for general purpose.
1-3
Features of the HPS
Altera Corporation