Altera cyclone V Technical Reference page 870

cv_5v4
2016.10.28
31 30
15 14
multiplane_read_enable Fields
Bit
0
flag
copyback_disable
Device does not support copyback command sequence
Module Instance
nandregs
Offset:
0x90
Access:
RW
Important: To prevent indeterminate system behavior, reserved areas of memory must not be accessed by
31 30
15 14
NAND Flash Controller
Send Feedback
29 28 27 26
13 12 11 10
Name
Certain devices support dedicated multiplane read
command sequences to read data in the same fashion
as is written with multiplane program commands.
This bit set should be set for the above devices. When
not set, pipeline reads in multiplane mode will still
happen in the order of multiplane writes, though
normal read command sequences will be issued to the
device. [list][*]1 - Device supports multiplane read
sequence [*]0 - Device does not support multiplane
read sequence[/list]
0xFFB80000
software or hardware. Any area of the memory map that is not explicitly defined as a register
space or accessible memory is considered reserved.
29 28 27 26
13 12 11 10
Bit Fields
25 24 23 22
Reserved
9 8 7 6
Reserved
Description
Base Address
Bit Fields
25 24 23 22
Reserved
9 8 7 6
Reserved
copyback_disable
21 20 19 18
5 4 3 2
Access
Register Address
0xFFB80090
21 20 19 18
5 4 3 2
13-49
17 16
1 0
flag
RW 0x0
Reset
RW 0x0
17 16
1 0
flag
RW 0x0
Altera Corporation