Jtag Boundary-Scan Testing In Cyclone V Devices; Bst Operation Control; Idcode - Altera Cyclone V Device Handbook

JTAG Boundary-Scan Testing in Cyclone V Devices

2014.01.10
CV-52009 Subscribe
This chapter describes the boundary-scan test (BST) features in Cyclone V devices.
Related Information
JTAG Configuration
Provides more information about JTAG configuration.
Cyclone V Device Handbook: Known Issues
Lists the planned updates to the Cyclone V Device Handbook chapters.

BST Operation Control

Cyclone V devices support IEEE Std. 1149.1 BST. You can perform BST on Cyclone V devices before, after,
and during configuration.

IDCODE

The is unique for each Cyclone V device. Use this code to identify the devices in a JTAG chain.
IDCODE
2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words
and logos are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other
words and logos identified as trademarks or service marks are the property of their respective holders as described at
www.altera.com/common/legal.html. Altera warrants performance of its semiconductor products to current specifications in accordance with
Altera's standard warranty, but reserves the right to make changes to any products and services at any time without notice. Altera assumes
no responsibility or liability arising out of the application or use of any information, product, or service described herein except as expressly
agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device specifications before relying on any published
information and before placing orders for products or services.
www.altera.com
101 Innovation Drive, San Jose, CA 95134
Send Feedback
on page 7-24
9
ISO
9001:2008
Registered