Program Trace Macrocell (Ptm) - Altera Cyclone V Device Handbook

Hide thumbs Also See for Cyclone V:

Table of Contents

Figure 7-5: CTI Trigger Connections

Each CTI trigger input can be connected through a CTM to one or more trigger outputs under control by

a debugger. The following figure shows a pictorial representation of CTI trigger connections. The red lines

depict the impact one trigger input can have on the entire system.

Related Information

For more information, refer to the CoreSight Components Technical Reference Manual on the ARM info

center website.

Program Trace Macrocell (PTM)

The PTM performs real-time program flow instruction tracing and provides a variety of filters and triggers

that can be used to trace specific portions of code.

The HPS contains two PTMs. Each PTM is paired with a processor and CTI. Trace data generated from the

PTM can be transmitted off-chip using HPS pins, or to the FPGA fabric, where it can be pre-processed and

transmitted off-chip using high-speed FPGA pins.

CoreSight Debug and Trace

Send Feedback

Program Trace Macrocell (PTM)

Trigger Outputs

Trigger Inputs

Altera Corporation

Table of Contents