Configurations Supported In Sdi Mode - Altera Cyclone V Device Handbook

CV-53004
2013.10.17

Configurations Supported in SDI Mode

Table 4-8: Configurations Supported in SDI Mode
Configuration
HD
3G
Figure 4-24: SDI Mode
Transceiver Protocol Configurations in Cyclone V Devices
Send Feedback
Data Rate (Mbps)
1,485
1,483.5
2,970
2,967
Functional Mode
PMA-PCS Interface Width
Data Rate (Gbps)
Number of Bonded Channels
Low Latency PCS
Word Aligner (Pattern Length)
8B/10B Encoder/Decoder
Rate Match FIFO
Byte SERDES
Byte Ordering
FPGA Fabric-Transceiver
Interface Width
FPGA Fabric-Transceiver
Interface Frequency (MHz)
Configurations Supported in SDI Mode
REFCLK Frequencies
(MHz)
74.25, 148.5
74.175, 148.35
148.5, 297
148.35, 296.7
SDI
10 bit
HD-SDI (1.485/1.4835)
x1
Disabled
Bit-Slip
Disabled
Disabled
Disabled Enabled
Disabled Disabled
10-bit 20-bit
148.5/148.35 74.25/74.175
FPGA Fabric-Transceiver Interface
Width
10 bit and 20 bit
10 bit and 20 bit
Only 20-bit interfaces allowed in
3G
Only 20-bit interfaces allowed in
3G
3G-SDI (2.97/2.967)
x1
Disabled
Bit-Slip
Disabled
Disabled
Enabled
Disabled
20-bit
148.5/148.35
Altera Corporation
4-25